MECHANICAL VAPOR RECOMPRESSION EVAPORATORS
Mechanical Vapor Recompression Evaporators (RV) are intended for applications that produce high volumes of industrial wastewater. Designed to treat and recycle difficult waste streams that can cause precipitation, crystal formation and component fouling on traditional equipment, the RV Series of vacuum evaporators can produce over 63,000 gallons of DI-quality distillate per day and boast surprisingly low energy consumption rates. By recycling their wastewater back through their process and lowering operating costs, Wastech customers can enjoy a quick ROI that can often be measured in months.
Pre-programmed and fully automated through a PLC-based control panel, the RV Series of evaporators ships ready to run. Only air, electrical and plumbing hookups are required. RV evaporators are capable of providing a true zero liquid discharge (ZLD) solution for "heavy users" of industrial process water in a climate where costs continue to rise and the enforcement of high-volume discharge penalties is increasing.
Which type of system is right for your process?
RV TC Series Forced Circulation Evaporators
hold a distinct advantage over traditional evaporators in that, through the use of external shell and tube heat exchangers, forced circulation and sophisticated blower technology, they are able to recover 90% or more of a highly contaminated waste stream with dramatically reduced cleaning and maintenance operations.
The self contained, skid-mounted design delivers reliable, continuous operation 24/7 and reduces potentially recyclable concentrate to less than 10% of it's original volume. Additionally, the RV TC takes advantage of high recirculation through the heat exchanger, which creates efficiency and reduces problematic phenomenon such as heating surface deposits or scaling. The result is a highly efficient system that lowers operating costs and pays for itself, often in less than 24 months.
|RV TC 2500||2,642 gal/day|
|RV TC 4000||3,963 gal/day|
|RV TC 8000||7,925 gal/day|
|RV TC 16000||15,850 gal/day|
|RV TC 32000||31,700 gal/day|
RV F Series: A New Generation Of Evaporators
Industrial process water users face more obstacles and challenges than ever before. With water shortages becoming an alarming reality around the globe, rising raw material costs, more stringent discharge requirements and a popular new trend that is spreading outward from the Southwestern United States of penalizing "heavy users" for their water usage, cost effective industrial process wastewater treatment recycling equipment has become a necessity. "Zero Liquid Discharge (ZLD)" water recycling systems are now a reality.
Wastech Controls and Engineering, Inc. has leveraged its three decades of process engineering experience to provide systems that operate at the forefront of technology at competitive pricing. The new RV F series of Mechanical Vapor Recompression Evaporators uses the most cutting edge technology to provide the most efficient evaporation unit yet. The most aggressive evaporation system in the series, the RV F is designed to comply with a new era of stringent discharge limits, reduce cost and recycle water.
The RV F series features a wide array of technological advancements, including improved access to primary components, new automatic chemical cleaning kit for heat exchanger that allows for non-peak hours service, smaller footprint and outdoor installation.
|RV F 4000||3,963 gal/day|
|RV F 11000||10,566 gal/day|
|RV F 16000||15,850 gal/day|
|RV F 32000||31,700 gal/day|
Need a Custom System?
Wastech Controls and Engineering, Inc. offers custom design and engineering of state-of-the-art turnkey industrial process systems.
One of Wastech’s application engineers will discuss the nature of your process with you exclusively for your facility.